View RB160L-6009_4552260.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Schottky barrier diode
RB160L-60
Applications General rectification Dimensions (Unit : mm)
Land size figure (Unit : mm)
2.0
2.60.2
3) High reliability
0.10.02 0.1
5.00.3
4
4
4.50.2
Features 1) Small power mold type. (PMDS) 2) Low IR.
2.0
1.20.3
PMDS
1.50.2 2.00.2
Structure
Construction Silicon epitaxial planar
ROHM : PMDS JEDEC : SOD-106 Manufacture Date
Taping specifications (Unit : mm)
4.00.1 2.00.05 1.550.05 1.75 0.1 0.3
5.50.05
1.55 2.90.1 4.00.1 2.8MAX
Absolute maximum ratings (Ta=25C) Parameter Symbol Reverse voltage (repetitive peak) VRM Reverse voltage (DC) VR Average rectified forward current (*1) Io Forward current surge peak (60Hz/1cyc) IFSM Junction temperature Tj Storage temperature Tstg (*1) Mounted on epoxy board. 180Half sine wave Electrical characteristics (Ta=25C) Parameter Forward voltage Reverse current
Limits 60 60 1 30 125 -40 to +125
Unit V V A A C C
Symbol VF IR
Min. -
Typ. -
Max. 0.58 1
Unit V mA
IF=1.0A VR=60V
www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved.
1/3
5.30.1 0.05 9.50.1
Conditions
2009.12 - Rev.C
12 0.2
4.2
RB160L-60
Electrical characteristics curves
1000 Ta=75C FORWARD CURRENT : IF(mA) REVERSE CURRENT : IR(uA) Ta=125C 100 Ta=25C 10000 1000 100 10 1 0.1 0.01 0.001 0 200 400 600 0 10 20 30 40 50 60 Ta=-25C Ta=25C CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=75C Ta=125C 1000
Data Sheet
f=1MH
100
Ta=-25C 10
10
1
1 0 5 10 15 20 25 30
FORWARD VOLTAGE : VF(mV) VF-IF CHARACTERISTICS
REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS
REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS
550 FORWARD VOLTAGE : VF(mV) REVERSE CURRENT : IR(uA) Ta=25C IF=1A n=30pcs
30 CAPACITANCE BETWEEN TERMINALS : Ct(pF) 25 20 15 10 AVE:3.724 5 0 Ta=25C VR=60V n=30pcs
200 Ta=25C f=1MHz VR=0V n=10pcs
540
190
530
180
520
170
510 AVE:529.4 500
160 AVE:192.4pF 150
VF DISPERSION MAP
IR DISPERSION MAP
Ct DISPERSION MAP
200 RESERVE RECOVERY TIME : trr(ns) PEAK SURGE FORWARD CURRENT : IFSM(A)
30 PEAK SURGE FORWARD CURRENT:IFSM(A) 25 20 15 10 AVE:11.7ns 5 0 1 trr DISPERSION MAP 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 Ta=25C IF=0.5A IR=1A Irr=0.25*IR n=10pcs Ifsm 8.3ms 8.3ms 1cyc
Ifsm 150
1cyc 8.3ms
100
50
AVE:126.0A
0
IFSM DISRESION MAP
200 1000 TRANSIENT THAERMAL IMPEDANCE : Rth (C/W) PEAK SURGE FORWARD CURRENT : IFSM(A) Ifsm 150 t Mounted on epoxy board Rth(j-a) FORWARD POWER DISSIPATION : Pf(W) 100 1.5 D=1/2 1 Sin(=180) DC 0.5 2
100
10
IM=10mA
Rth(j-c)
IF=0.5A
50
1
1ms
tim 0
300us 0.1 0 0.5 1 1.5 2
0 1 10 TIME : t(ms) IFSM-t CHARACTERISTICS 100
0.001
0.1
10
1000
TIME : t(s) Rth-t CHARACTERISTICS
AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS
www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved.
2/3
2009.12 - Rev.C
RB160L-60
Data Sheet
0.03
3 0A AVERAGE RECTIFIED FORWARD CURRENT:Io(A) 2.5 2 1.5 D=1/2 1 0.5 Sin(=180) 0 0 5 10 15 20 0 25 50 75 100 125 DC 0V t T Io AVERAGE RECTIFIED FORWARD CURRENT:Io(A) VR D=t/T VR=30V Tj=125C
3 0A 2.5 2 1.5 D=1/2 1 0.5 Sin(=180) 0 0 25 50 75 100 125 DC 0V t T Io VR D=t/T VR=30V Tj=125C
REVERSE POWER DISSIPATION:PR (W)
0.02
Sin(=180) 0.01 DC D=1/2
0
REVERSE VOLTAGE : VR(V) VR-PR CHARACTERISTICS
AMBIENT TEMPERATURE:Ta(C) Derating Curve"(Io-Ta)
CASE TEMPARATURE:Tc(C) Derating Curve"(Io-Tc)
30 ELECTROSTATIC DISCHARGE TEST ESD(KV) No break at 30kV 25 20 15 10 5 AVE:8.70kV 0 C=200pF R=0 C=100pF R=1.5k
ESD DISPERSION MAP
www.rohm.com (c)2009 ROHM Co., Ltd. All rights reserved.
2/3
2009.12 - Rev.C
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved.
R0039A

▲Up To Search▲

Price & Availability of RB160L-6009

	To Download RB160L-6009 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .